Measuring Instrument MEXA-600S 1 ~blog/2025/10/20/photo_1_

Measuring Instrument

MEXA-600S

Description :

Support particulate matter inspection (PM inspection) by Opaciy-meter (permeable smoke meta) based on the new regulation. It has better measurement accuracy and reproducibility than light-reflective smoke measuring instruments, and can be more accurate in measurement up to low concentrations.

Minta Penawaran :

Tertarik untuk mendapatkan informasi lebih lanjut tentang produk ini?

New Regulatory Response

Axel can be measured according to the order of regulatory mode, and the car model selection switch can select the regulatory value and check whether it has passed.
Remote operation by remote control

It can also work in the driver's seat of the test vehicle according to the remote control, and the Axel ON / OFF time display function has also made the test even simpler.
High Reliability

The Opaciy method of calculating the smoke concentration in the light permeability of the exhaust gas is adopted, and the reproducibility is good measurement is possible. It also has a simple check function with an optical filter.
Various data input/output methods

The RS-232C communication function allows you to direct pre-Axel measurements from the host computer. Measurement results can also be output from a built-in printer in the movable part and the results can be managed from the host computer.
Excellent scalability

You can connect the oil temperature sensor, the rotation sensor (optional) to get the data and view it with the smoke concentration.
Adopts light transmission method with excellent response speed and reproducibility
Built-in printer in the operation part

The built-in movable printer can output measurement results and manage measurement results on the host computer with RS-232C standard equipment.
Free Axel Measurement

Automatic sequence (regulatory response)

Measured = Smoke in diesel cars

Measurement principle = Optical transmission method (partial flow back pressure type)

Measuring range = Light Absorption Coefficient K=0.000〜9.999m −1
Opacity N=0.00〜99.9%

External Input Format = Digital Input/Output (RS-232C [Standard])

The printer = Built-in Printer[Standard]

Power = AC100V 50/60Hz(Power cable 3m)

Power consumption = Approx.200VA

Wireless = Frequency band/2.4GHz
Output/1mW

External dimensions = Operation unit/260(W)×335(D)×157(H)mm[173mm height including antenna]
Detection part/472(W)×258(D)×395(H)mm
Wireless remote control/69(W)×216(D)×27(H)mm

Mass = Manipulator/Approx. 3.5kg
Detection part/Approximately 6.5kg[Including each part]
Wireless remote control/Approximately 250g[excluding battery]

Sample Gas = Dedicated Probe(L=2.5m、Inner diameter Ø10.8mm)